Description
Eaton Contactors offer a wide voltage tolerance +10% – 20% nominal. Moeller contactors have front mounted coil terminals, four compact frame sizes cover applications to 150A, dual box terminals make wiring safer and easier for cables with uneven cross -sections. Their plug-in technology provides tool-less connection with other contactors and accessories, saving time and reducing wiring errors.
Contactor AC/DC Selection Chart: |
Photo | Three Phase HP Ratings |
Auxiliary Contacts |
Catalog No. | |||
---|---|---|---|---|---|---|
230V | 460V | NO | NC | Screw Terminals | ||
60 | 125 | 0 | 0 | XTCE185H | ||
2 | 2 | XTCE185H22 | ||||
75 | 150 | 0 | 0 | XTCE225H | ||
2 | 2 | XTCE225H22 | ||||
100 | 200 | 0 | 0 | XTCE250L | ||
2 | 2 | XTCE250L22 | ||||
125 | 200 | 0 | 0 | XTCE300L | ||
2 | 2 | XTCE300L22 | ||||
150 | 300 | 0 | 0 | XTCE400M | ||
2 | 2 | XTCE400M22 | ||||
200 | 400 | 0 | 0 | XTCE500M | ||
2 | 2 | XTCE500M22 | ||||
200 | 400 | 0 | 0 | XTCE580N | ||
2 | 2 | XTCE580N22 | ||||
250 | 500 | 0 | 0 | XTCE650N | ||
2 | 2 | XTCE650N22 | ||||
300 | 600 | 0 | 0 | XTCE750N | ||
2 | 2 | XTCE750N22 | ||||
350 | 700 | 0 | 0 | XTCE820N | ||
2 | 2 | XTCE820N22 | ||||
400 | 800 | 0 | 0 | XTCEC10N | ||
2 | 2 | XTCEC10N22 |
General Purpose Continuous Amp Ratings: |
Contactor Series | Open Amps Ratings: | Enclosed Amps: |
---|---|---|
DIL M185 | 225 | 202 |
DIL M225 | 250 | 225 |
DIL M250 | 350 | 315 |
DIL M300 | 350 | 315 |
DIL M400 | 450 | 405 |
DIL M500 | 550 | 495 |
DIL M580 | 630 | 567 |
DIL M650 | 700 | 630 |
DIL M750 | 800 | 720 |
DIL M820 | 850 | 765 |
DIL M1000 | 1000 | 900 |
Standard Coil Voltages: | |
Code | Volts |
RAC24 | 24 AC |
RAC48 | 42-48 AC |
RAC120 | 100-120 AC |
RAC240 | 190-240 AC |
RAC500 | 480-500 AC |
RDC24 | 24-27 DC |
RDC130 | 110-130 DC |
Connection Methods: |
Conventional: jumper A10 -A11 power to A1 / A2 |
PLC Transistor Output: always power to A1 & A2 / plc (+) to A4 /plc (-) to A3 no jumper A10-A11 |
Low Power Contacts: always power to A1 & A2 / remote signal contact across A10 & A11 / no jumper A10-A11 |
Note: In all cases, an E-STOP can be inserted before A1. |
DC Wiring: A1 is (+) and A2 is (-). |