Description
The SMLB series Drum Brakes shown here have been developed using state of the art industrial brake technology according to DIN 15435.
This robust model was particularly designed for use in general engineering, metallurgy, crane and conveyor plants, for use both underground and above ground, as well as in wind turbine plants.
These brakes are for use whenever a constant brake torque is of utmost importance, not only for reasons of safety but also from a commercial standpoint.
SMLB Specifications
BRAKE MODEL NUMBER |
DRUM SIZE D1 |
MAX TORQUE LB-FT. |
THRUSTER POWER KVA |
NETT WEIGHT LB |
IMPERIAL DIMENSIONS (in.) as AISE | |||||||||||||||
B | D2 | H1 | H2 | H3 | H4 | I | K | L1 | L2 | L3 | L4 | W1 | W2 | W3 | W4 | |||||
SMLB06-EJ023/5 | 6 | 180 | 0.20 | 60 | 2.13 | 0.433 | 4.724 | 14.7 | 13.6 | 0 | 3.00 | 4.00 | 14.8 | 5.00 | 15.5 | 5.50 | 7.62 | 5.15 | 3.3 | 4.0 |
SMLB08-EJ023/5 -EJ030/5 |
8 | 220 290 |
0.20 0.20 |
75 75 |
2.76 | 0.669 | 7.008 | 16.9 19.1 |
15.8 17.3 |
0.51 | 5.75 | 3.25 | 16.0 | 6.34 | 16.8 | 6.87 | 7.62 | 5.15 | 4.2 | 7.4 |
SMLB10-EJ023/5 -EJ030/5 -EJ050/6 |
10 | 240 320 530 |
0.20 0.20 0.20 |
95 100 125 |
3.54 | 0.669 | 8.386 | 19.9 19.9 22.7 |
19.0 19.1 20.3 |
0.59 | 6.25 | 4.00 | 17.3 | 7.68 | 18.7 18.7 19.8 |
7.90 | 7.62 7.62 8.80 |
5.15 5.15 6.75 |
5.0 | 7.9 |
SMLB13-EJ030/5 -EJ050/6 -EJ080/6 |
13 | 380 640 1140 |
0.20 0.20 0.48 |
145 175 180 |
4.33 | 0.827 | 9.882 | 24.3 | 24.5 24.0 24.5 |
0.51 | 9.00 | 5.75 | 25.7 | 9.82 | 21.6 22.7 22.7 |
10.00 | 8.10 9.10 9.10 |
5.15 6.75 6.75 |
6.1 | 11.0 |
SMLB16-EJ050/6 -EJ080/6 -EJ121/6 |
16 | 630 1190 1960 |
0.20 0.48 0.48 |
240 245 280 |
5.51 | 1.063 | 12.126 | 29.9 29.9 31.5 |
29.6 29.6 30.9 |
0.71 | 10.75 | 7.50 | 27.5 | 11.61 | 25.3 | 11.73 | 9.41 9.41 11.34 |
6.75 6.75 7.75 |
7.4 | 13.0 |
SMLB19-EJ080/6 -EJ121/6 -EJ201/6 |
19 | 1180 2140 3850 |
0.48 0.48 1.52 |
290 325 325 |
7.09 | 1.063 | 13.268 | 31.9 | 32.0 | 0 | 13 | 9.25 | 38.9 | 13.84 | 28.0 | 14.00 | 8.80 11.14 11.14 |
6.75 7.75 7.75 |
9.3 | 15.8 |
Dimensions:
- Metric as DIN standard code: DL
- Imperial as A.I.S.E. standard code: SMLA
- Also non-standard drum sizes and base fixings
Construction:
- Fabricated steel mechanism
- Major pivots non-ferrous bushed
- All pins ground stainless steel
- Friction linings high temperature non asbestos
Thrusters:
- Standard Eltma Elhy EB series IP56 enclosed
Special Options: -Self adjusting mechanism
- Mechanical release lever
- Limit switches to monitor release/ set or wear
- Hydraulic override by remote pedal
- Electronic modulated torque by remote pedal
- Reverse brake mechanism thruster to apply
- Soft stop, or soft set
- Special materials and finishes as required, including high integrity requirements.
Applications:
- Mechanical handling equipment, cranes, winches, stacker reclaimers, ski lifts, and conveyors etc.
Engineering:
- Design and selection assistance available always
Thruster data
- Standard EB Series:
- Fluid; transformer oil BS148 typical Shell diala ‘B’
- Approximate operating times: brake release 0.1 seconds
- Brake set 0.25 -0.5 seconds depending on size and brake spring load.
- Airgap dust and drip protected by neoprene qaiter
- Terminal Box IP55 standard enclosure
Optional features
- High temperature viton seals.
- Internal preset hydraulic delay valve(s)
- Dust protecting hood
- Internal return c-spring
- Converter unit to operate from DC supply 220-440V
- Explosion proof design EExd Group I and II
Alternative Thrusters
- Johnson/Eldro/Elhy/Elco to din 15430.
- DC Custom
- Thrusters Also type KT/TKF can be supplied.
- Flame proof available